Ulti-Mate Stonewold Mk2 Roof Tile Vent - Grey 
Bond It Stabilizing Solution - White 5L 
Soudal Sealant Remover – 400ml 
Bond It Economy Sealant Gun - Blue 300ml 
Ronseal Garden Paint - Pink Jasmine 750ml 
Youngman Double Section Roof Ladder 4.89m (57664600) 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
ALM Code 7 Milled Lead - 510mm x 6m 
Restec CSM Fibreglass Roll 450g/m² - (15m² Roll) 
Everbuild Triple Action Wood Treatment – 1 Litre 
Bond It PVA & Adhesive Sealer - White 2.5kg 
Bond It Wood Pro High Strength Flexible Hybrid Adhesive - EU3 Buff 
Ronseal Anti-Condensation Paint - White 2.5L 
Everbuild P18 Gas Leak Detector - 400ml 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Bond It Contractors PVA - 2.5L White 
Cromar Bitumen Trowel Mastic - Black 1L 
ALM Code 6 Milled Lead Flashing - 800mm x 6m 
ALM Code 4 Milled Lead - 360mm x 3m 
Code 3 Cast Lead - 510mm x 3m 
Soudaseal Mirror Light Grey, 290ml 
Armatool Leather Belt Black, Large 
Soudal Solvent-Free Trade Grab Adhesive - White 290ml 
Everbuild Silicone Spray - 400ml Flashing Tape
Best Sellers
-
Cromar Black Bitumen Paint – 1 Litre
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Everbuild Fix & Fill Expanding Foam – 500ml
£9.99 Incl VAT £8.33 Excl VAT Read more -
Bond It B2 Expanding PU Gun Grade Foam – Beige 750ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Ronseal Exterior Yacht Varnish – Satin 1L
£24.99 Incl VAT £20.83 Excl VAT Add to basket -
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25)
£59.99 Incl VAT £49.99 Excl VAT Read more -
Evo-Stik Glazing Silicone Sealant – Clear 280ml
£7.49 Incl VAT £6.24 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
