Everbuild Flue Jointing Compound - 1kg 
Uses
The Constructa-Pro by Everbuild is an excellent gap-filling product that can adhere to most common building surfaces. The Everbuild technicians formulated this product to have excellent resistance when cured, with it being rot-proof and moisture-resistant. Overall defence against temperature is one of the best on the market, combating cold temperatures as low as -40°C and scorching heat of +80°C. Applications this product is commonly used for include;
- Fixing plasterboard to solid walls, metal and timber stud walls and battens
- Bonding insulation boards to most substrates
- Mortar substitute for building rough garden walls and planters
- Sealing around air bricks for suspended floor ventilation
The surfaces this product can adhere to include
- Masonry
- Concrete
- Plaster
- Timber
- Metal
- Insulation boards
- Polystyrene
- Polyurethane
- Bitumen
- Asphalt
Preparation
Surfaces you intend to bond or fill should be moistened with water to aid in the curing process.
Applications
- Using a foam gun, screw the Constructa-Pro onto the top of the gun and ensure it's facing upside down during the application.
- Pointing the tip of the foam gun to the area, extrude the foam to the area evenly.
Limitations
- Inadequate moistening of the surface and overfilling when applying can cause undesirable results.
- Do not use on polyethylene, silicone, oily or greasy surfaces
- When finished, clean the foam gun using a gun foam cleaner.
- Always apply this product in ambient temperatures above 5°C
- Any spillages accidentally caused must be cleaned immediately
