Everbuild Constructa-Pro Adhesive Foam - Grey 750ml (Box of 12)

Uses

The Constructa-Pro by Everbuild is an excellent gap-filling product that can adhere to most common building surfaces. The Everbuild technicians formulated this product to have excellent resistance when cured, with it being rot-proof and moisture-resistant. Overall defence against temperature is one of the best on the market, combating cold temperatures as low as -40°C and scorching heat of +80°C. Applications this product is commonly used for include;

• Fixing plasterboard to solid walls, metal and timber stud walls and battens
• Bonding insulation boards to most substrates
• Mortar substitute for building rough garden walls and planters
• Sealing around air bricks for suspended floor ventilation

The surfaces this product can adhere to include

• Masonry
• Concrete
• Plaster
• Timber
• Metal
• Insulation boards
• Polystyrene
• Polyurethane
• Bitumen
• Asphalt

Preparation

Surfaces you intend to bond or fill should be moistened with water to aid in the curing process.

Applications

1. Using a foam gun, screw the Constructa-Pro onto the top of the gun and ensure it's facing upside down during the application.
2. Pointing the tip of the foam gun to the area, extrude the foam to the area evenly.

Limitations

• Inadequate moistening of the surface and overfilling when applying can cause undesirable results.
• Do not use on polyethylene, silicone, oily or greasy surfaces
• When finished, clean the foam gun using a gun foam cleaner.
• Always apply this product in ambient temperatures above 5°C
• Any spillages accidentally caused must be cleaned immediately