Name: Everbuild Everflex 115 G.P Building Mastic - White 285ml (Box of 25)
SKU: MASWE25
Availability: InStock

Uses

Everflex 115 GP Building Mastic is an excellent mastic with outstanding adhesive properties enabling it to adhere to various surfaces. It works perfectly as a perimeter pointer internally and externally, with areas such as doors and windows being perfect application areas. One of the typical applications for this product is sealing composite sectional panels and low-movement vertical building joints.

Preparation

Prepare the surfaces before starting the application. Complete this by removing all dust, oil, grease and similar impurities that can hinder the adhesion. New concrete or mortar should be allowed adequate time to dry and mature.

Application

Cut the tip off the cartridge without damaging the threaded screw.
Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
Using a standard sealant gun, apply a firm, consistent pressure to extrude an even bead to optimise adhesion and visual appearance.
Tool down after application using a wetted spatula, wooden spoon or applicator tool.

Limitations

This product is not compatible in areas that are exposed to solvents, petrol or oils
Give fresh concrete or mortar 28 days to reduce surface alkalinity
Do not use in conjunction with bitumen or asphalt
This product may stain marble, slate or specific sensitive natural stone.

Additional information

Weight	12 kg
Product Type	Building Supplies
Chemical Base	Thixotropic paste (ready to use)
Density	1.6 g/cm3 approx
Movement Capability	Low
Service Temperature	-25°C to 70°C (90°C intermittent)
Joint Design	Minimum width: 5mm. Maximum width: 20mm. Minimum depth: 10mm. Maximum depth: 20mm. For deep joints, reduce depth by using EVERFLEX® FIX AND FILL FOAM or a suitable joint backer rod. All joints should be designed so that the seal is placed in a position which does not retain water or form a water trap. Triangular fillets should be no less than 12mm across the face and should be finished with a flat or convex face.
Compatibility	Can be used in contact with most building materials but should not be used against bituminous compounds.
Consumption / Yield / Dosage (PRINT single line)	Approx 10 linear metres per cartridge
Ambient Air Temperature	5°C to 50°C
Curing Time	Normally 7 days, the mass below remaining plastic

Technical Data Sheet

Weight

12 kg

Product Type

Building Supplies

Chemical Base

Thixotropic paste (ready to use)

Density

1.6 g/cm3 approx

Movement Capability

Low

Service Temperature

-25°C to 70°C (90°C intermittent)

Joint Design

Minimum width: 5mm. Maximum width: 20mm.
Minimum depth: 10mm. Maximum depth: 20mm.
For deep joints, reduce depth by using EVERFLEX® FIX AND FILL FOAM or a
suitable joint backer rod. All joints should be designed so that the seal is
placed in a position which does not retain water or form a water trap. Triangular
fillets should be no less than 12mm across the face and should be
finished with a flat or convex face.

Compatibility

Can be used in contact with most building materials but should not be used
against bituminous compounds.

Consumption / Yield / Dosage (PRINT single line)

Approx 10 linear metres per cartridge

Ambient Air Temperature

5°C to 50°C

Curing Time

Normally 7 days, the mass below remaining plastic

BANK HOLIDAY HOURS WE WILL BE CLOSED Fri 18th-Mon 21st April
Any Orders Placed After 2pm On Wednesday 16th will Be Dispatched Tuesday 22nd

BANK HOLIDAY HOURS WE WILL BE CLOSED Fri 18th-Mon 21st April
Any Orders Placed After 2pm On Wednesday 16th will Be Dispatched Tuesday 22nd

FREE Next Working Day Delivery on Orders over £10*