Thompson's Water Seal - 5L 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Code 6 Cast Lead - 210mm x 6m 
Ulti-Mate Stonewold Mk2 Roof Tile Vent - Grey 
Everbuild Gun A Nail Standard – White 310ml 
Armatool Slate Guillotone 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Timco Blue Polypropylene Rope 8mm x 15m 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Bond It Bitumen Primer - Black 2.5L 
Timloc Interlocking Plain Tile Vent Brown (Box of 12) 
Code 3 Cast Lead - 760mm x 6m 
Everbuild Filler Coat – White 5 Litre 
Code 4 Cast Lead - 914mm x 6m 
Code 7 Cast Lead - 850mm x 3m 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml (Box of 12) 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
ALM Code 3 Milled Lead - 1600mm x 3m 
Everbuild Smart Tack Handy – 500ml 
Bond It Lightweight Render Mesh - 50m x 1m (Pink) 
ALM Code 7 Milled Lead - 180mm x 6m 
Code 5 Cast Lead - 600mm x 3m 
Bond It Squeezy Door and Frame Sealant - EU2 White 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
Cromar Black Bitumen Paint – 1 Litre Roof Felt Adhesives
Best Sellers
-
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
IKO 5U Eaves Protection Strips – 16m x 330mm
£24.99 Incl VAT £20.83 Excl VAT Add to basket -
Everbuild No Waste Foam – 750ml
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
10 x Permavent Black Breather Membrane – 1m x 50m
£465.00 Incl VAT £387.50 Excl VAT Add to basket -
ALM Code 6 Milled Lead Flashing – 360mm x 6m
£184.08 Incl VAT £153.40 Excl VAT Add to basket -
Bond It AS900 Acoustic Sealant White 900ml – Box of 12
£58.98 Incl VAT £49.15 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
