Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
Soudal Construction Silicone, Clear - 290ml 
Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml (Box of 12) 
Thompson's Emergency Roof Seal - Black 1L 
ALM Code 6 Milled Lead Flashing - 510mm x 3m 
Timloc Underlay Felt Lap Vent (Pack of 10) 
Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
Oxidised Bitumen Slab - 23kg 
Everflex Premium+ 450 Builders Silicone – Grey (Box of 12) 
Code 5 Cast Lead - 1600mm x 3m 
ALM Code 4 Milled Lead - 760mm x 6m 
OX Pro Tough Bucket, Blue - 15 Litre 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
Everbuild Maximum Torque - White 290ml (Box of 12) 
Ulti-Mate Ulti-Match Plain Tile Vent 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Hedgehog Gutter Brush Leaf Guard Black - 4m x 200mm 
Timco Flat Wood Bit Set 
OX Tools Trade Heavy Duty Chalk Line Reel 30m / 100ft 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
Soudal Exterior Frame Silicone - Brown 270ml (Box of 12) 
Everbuild Multi-Use Wonder Wipes Spray – 1 Litre 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Gorilla Wood Glue - Brown 236ml 
Everflex Premium 175 Universal Acrylic Sealant - White 300ml (Box of 25) 
FloPlast Half Round Downpipe 112° Bend, Black 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in 
Freeflow 68mm Round Down Pipe Shoe - Black 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Timco Aluminium Hawk 
Klober 15x9 Tile Vent - Slate Grey KG9690-0429 (Box of 10) 
Code 6 Cast Lead - 1200mm x 3m 
Code 3 Cast Lead - 180mm x 6m 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m Roof Felt Adhesives
Best Sellers
-
Knauf Insulation Loft Roll 44 – Combi Cut
From: £62.25 Incl VAT £51.88 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml (Box of 12)
£66.00 Incl VAT £55.00 Excl VAT Add to basket -
Soudal Compact Foam Gun PU Foam
£22.99 Incl VAT £19.16 Excl VAT Add to basket -
Bond It PVA & Adhesive Sealer – White 500ml
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
ALM Code 7 Milled Lead – 914mm x 3m
£277.54 Incl VAT £231.28 Excl VAT Add to basket -
Code 7 Cast Lead – 850mm x 6m
£519.79 Incl VAT £433.16 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
