Ronseal One Coat Water-Based Tile Paint - Cobalt Grey Gloss 750ml 
Timco Firmahold Hammer Tacker 
Bond It 30 Minute PU Wood Adhesive - Brown 750g 
Siroflex Painters Caulk-It - 380ml 
Bond It Expanding Foam Cleaning Fluid - Clear 500ml 
Timco Flat Wood Bit Set 
Timco Grouting Float 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Thompson's Stain Block Damp Seal - White 250ml 
Thompson's uPVC Restorer - 480ml 
Ronseal Precision Finish Brush - 5 Pack 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm 
Code 7 Cast Lead - 150mm x 3m 
Bond It Contractors PVA - 2.5L White 
The Bond It Brick & Patio Cleaner can deliver outstanding results, however, given that the properties of the product formula are heavily acidic, it is highly suggested to take care when using this product, and reading the Technical Data Sheet and Safety Data Sheet is recommended to ensure that you use it appropriately.
Application
Before the application can commence, prepare yourself by wearing proper PPE, which includes; Gloves, overall, boots and goggles. Protect metal surfaces and paint-work before with polythene sheets and tape. Also, get a plastic container to dilute this product, do not dilute using the product canister itself.
Remove any excess dirt, mortar or other contaminants before application using a stiff yard brush. If you're cleaning down brickwork, apply water before over it to saturate the cleaner when contact commences, as it will help protect the mortar.
- For normal use, dilute the cleaner with water, using a ratio of Cleaner (1) : Water (2-4)
- Apply the diluted solution using a low-pressure hose or brush.
- Allow to stand for 10-15 minutes, ensuring the area doesn't dry out and is scrubbed occasionally with a stiff broom.
- Rinse thoroughly with large amounts of water
If the stains persist, repeat the process. Consider changing the dilution by making the cleaner less diluted.
