Klober Permo Ultra 120 - 1m x 50m 
Code 4 Cast Lead - 450mm x 3m 
Everbuild Silicone Spray - 400ml 
OB41 White Grease Spray - 400ml 
ALM Code 8 Milled Lead - 800mm x 6m 
Ronseal Precision Finish Brush - 2 Inch 
ALM Code 5 Milled Lead - 300mm x 6m 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Timco Lithium EP2 Grease - 400g 
Ronseal Expanding Foam Filler - 500ml 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Ronseal Hairline Crack Ready Mix Wall Filler - White 330g 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Everbuild XT44 Maintenance Spray - 400ml 
Soudal Silicone Spray - 400ml (Box of 12) 
ALM Code 3 Milled Lead - 300mm x 6m 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Everbuild Black Jack 908 DPM – 5 Litre 
Code 7 Cast Lead - 240mm x 3m 
Siroflex PVCu Trim & Mitre Cutter 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
Code 8 Cast Lead - 240mm x 3m Flashing Tape
Best Sellers
-
Everbuild Masonry Dry Rot Treatment – 5 Litre
£21.99 Incl VAT £18.33 Excl VAT Add to basket -
Everbuild KOS Black Fire Cement – 2kg
£7.99 Incl VAT £6.66 Excl VAT Read more -
Thompson’s Stain Block Damp Seal – White 750ml
£16.90 Incl VAT £14.08 Excl VAT Add to basket -
Ronseal Precision Finish Brush – 1 Inch Angled
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Bond It All Weather Roofing Compound – Black 5L
£26.99 Incl VAT £22.49 Excl VAT Add to basket -
Code 6 Cast Lead – 360mm x 3m
£91.39 Incl VAT £76.16 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
