Thompson's One Coat Damp Seal - White 750ml 
Bond It Mega Stik PU Adhesive - Beige 750ml 
Code 6 Cast Lead - 210mm x 6m 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) 
OX Pro Magnetic Level 600mm 
FloPlast Half Round Stop End Outlet, White – 112mm 
Code 3 Cast Lead - 390mm x 6m 
Soudal Silicone Sealant Remover, Clear - 100ml 
OX Pro 20oz Forged Steel Hatchet 
Ulti-Mate Cambrian Grey Tile Vent 
FloPlast Square Union Unit - White 
Timco Extra Heavy Duty Hand Cleaner with Pump - 4 Litres 
Everbuild Everflex Contract 700T LMN Silicone - Translucent (Box of 25) 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
Code 5 Cast Lead - 760mm x 3m 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Bond It FG8 Food Grade Silicone - White 310ml 
Leather Roofers Tool & Nail Pouch, Dark Brown 
Thompson's One Coat Waterseal - 2.5L 
Soudal Firecement HT, Black - 300ml 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
Bond It Trowel Mastic - Black 5L 
Bond It Monster Scrim Drywall Tape - White 100mm x 90m 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml 
Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Timco Pipe Shears 
FloPlast Square Gutter 90° Bend - White 
ALM Code 3 Milled Lead - 240mm x 6m 
Timco Square Twist Nails - Galvanised (40 x 3.75mm) 1kg 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
Freeflow 114mm Square Gutter Fascia Bracket - White 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
Everbuild Everflex Mirror Mate Adhesive - White 290ml 
FloPlast Square Line Running Outlet White – 114mm x 65mm 
Soudal Grip ALL Solvent-Free - White 290ml 
ALM Code 4 Milled Lead - 600mm x 6m 
OX Pro Tough Nylon Braided Builders Line 105m / 350ft - Cyan 
OX Pro Impact Bit Set - 11 Piece 
Freeflow 65mm Square Down Pipe Connector - Black 
Easy-Trim Universal Dry Verge System - Terracotta 
Lead Sheet Restorer - G1 
Everbuild All Purpose Ready Mixed Filler - 1kg 
Thompson's Patio & Block Paving Anti-Slip Additive - 200g 
Ronseal Exterior Yacht Varnish - Satin 2.5L 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml (Box of 12) 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Code 8 Cast Lead - 800mm x 3m 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
Permavent Black Breather Membrane – 1m x 20m 
OX Tools Pro Sharpdraw Snap Off Pencil Replacement Blades - Set of 3 
Ulti-Mate Sandtoft Rivius Charcoal Roof Vent Tile 
ALM Code 5 Milled Lead - 1600mm x 6m 
Soudal Genius Gun Gap Filling Foam - 750ml Roof Felt Adhesives
Best Sellers
-
ALM Code 7 Milled Lead – 180mm x 6m
£110.45 Incl VAT £92.04 Excl VAT Add to basket -
OX Pro Moulding Bar – 10″ / 250mm
£16.99 Incl VAT £14.16 Excl VAT Add to basket -
Klober 20K Slate Vent KG9795-0429 Slate Grey
£36.50 Incl VAT £30.42 Excl VAT Add to basket -
Ulti-Mate Square Top Large Roof Tile Vent
From: £24.99 Incl VAT £20.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Pro Aluminium Hawk – 13 inch x 13 inch
£24.33 Incl VAT £20.28 Excl VAT Add to basket -
Bond It Contactors Grade PVA Admix Adhesive – White 5L
£11.99 Incl VAT £9.99 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
