Everbuild Jumbo Mitre Fast Kit (Box of 6) 
OX Pro Electricians Chisel - 2¼" X 10" 
OX Pro Chalk Refill, Yellow – 226g 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Siroflex Trade High Viscosity Superglue - 20g 
Everbuild Multi-Stick Adhesive - White 350ml 
ALM Code 6 Milled Lead Flashing - 180mm x 3m 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Klober Double Pantile Vent - Brown KG9858-3-0247 (Box of 10) 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
OB41 White Grease Spray - 400ml 
Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
OX Pro 4 In 1 Heavy Duty Staple Gun 
Freeflow 112mm Round Gutter System Stopend Outlet - White 
ALM Code 3 Milled Lead - 510mm x 6m 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Everbuild Mitre Fast Activator – 200ml 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
OX Pro Tuff Spirit Level - 1200mm 
Ronseal Anti-Condensation Paint - White 2.5L Flashing Tape
Best Sellers
-
OX Pro Rodless Sealant Gun – Up to 400ml
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
OX Pro 20oz Forged Steel Hatchet
£28.99 Incl VAT £24.16 Excl VAT Add to basket -
Soudal B1 Fire Class Expanding Foam Handheld – 750ml (Box of 12)
£70.68 Incl VAT £58.90 Excl VAT Add to basket -
Code 5 Cast Lead – 850mm x 3m
£185.64 Incl VAT £154.70 Excl VAT Add to basket -
Timloc Double Roman Tile Vent
From: £24.99 Incl VAT £20.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 6 Cast Lead – 800mm x 3m
£205.63 Incl VAT £171.36 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
